Slim Chuck - Advanced
Nikken's Slim Chucks provide customers with high-gripping torque and excellent run-out accuracy for high-precision drilling and light milling. Slim Chucks are available as Standard and Advanced Technology products.
 | 1. Slim Chucks incorporate TiN Bearing Nut technology. TiN Bearing Nuts are more efficient and deliver better all-round performance than holders using conventional ball bearing nuts. - good sliding effect and reduced friction due to the TiN Bearing Nuts' surface hardness (HV2,200); - reduced internal corrosion for long life and improved cutting performance - better balance improves surface finish and run-out accuracy - improved flange contact results in less vibration and therefore improved accuracy |
| 2. Slim Chucks have a more rigid structure and a high-gripping torque than competitor products and are not subject to the effects of unwanted taper pushing. A feature of Slim Chucks is the 8 degree taper. The smaller the taper angle, the better concentricity is obtained. |  |
| 3. Slim Chucks provide customers with run-out accuracy within 3 microns (with P type collet). Slim Chuck Advanced products are available in BT30/40; HSK40A-63A/100A/32E/40E/50E; IT40x/50x shank sizes |
| Part Number | Capacity |
Nose Diameter |
Gauge Length |
Collet |
Max RPM |
Spanner |
| BT30 GSK10-60P | 1.75-10.0 |
27.5 |
60 |
SK10 |
40,000 |
GH10 |
| BT30 GSK16-60P | 2.75-16.0 |
40 |
60 |
SK16 |
30,000 |
GH16 |
| BT30 GSK6-60P | 0.7-6.0 |
19.5 |
60 |
SK6 |
40,000 |
GH6 |
| BT40 GSK10-120P | 1.75-10.0 |
27.5 |
120 |
SK10 |
30,000 |
GH10 |
| BT40 GSK10-60P | 1.75-10.0 |
27.5 |
60 |
SK10 |
30,000 |
GH10 |
| BT40 GSK16-90P | 2.75-16.0 |
40 |
90 |
SK16 |
25,000 |
GH16 |
| BT40 GSK6-90P | 0.7-6.0 |
19.5 |
90 |
SK6 |
30,000 |
GH6 |
| HSK100A GSK10C-105P | 1.75-10.0 |
27.5 |
105 |
SK10 |
20,000 |
GH10 |
| HSK100A GSK16-105P | 2.75-16.0 |
40 |
105 |
SK16 |
20,000 |
GH16 |
| HSK100A GSK16C-120P | 2.75-16.0 |
40 |
120 |
SK16 |
20,000 |
GH16 |
| HSK32E GSK10-60P | 1.75-10.0 |
27.5 |
60 |
SK10 |
40,000 |
GH10 |
| HSK32E-GSK6-50P | 0.7-6.0 |
19.5 |
50 |
SK6 |
40,000 |
GH6 |
| HSK40A GSK10-75P | 1.75-10.0 |
27.5 |
75 |
SK10 |
40,000 |
GH10 |
| HSK40A GSK16-80P | 2.75-16.0 |
40 |
80 |
SK16 |
30,000 |
GH16 |
| HSK40A GSK6-60P | 0.7-6.0 |
19.5 |
60 |
SK6 |
40,000 |
GH6 |
| HSK40E GSK10-60P | 1.75-10.0 |
27.5 |
60 |
SK10 |
40,000 |
GH10 |
| HSK40E GSK16-80P | 2.75-16.0 |
40 |
80 |
SK16 |
30,000 |
GH16 |
| HSK40E GSK6-60P | 0.7-6.0 |
19.5 |
60 |
SK6 |
40,000 |
GH6 |
| HSK50E GSK10C-105P | 1.75-10.0 |
27.5 |
105 |
SK10 |
30,000 |
GH10 |
| HSK50E GSK16C-120P | 2.75-16.0 |
40 |
120 |
SK16 |
25,000 |
GH16 |
| HSK63A GSK10C-105P | 1.75-10.0 |
27.5 |
105 |
SK10 |
30,000 |
GH10 |
| HSK63A GSK10C-120P | 1.75-10.0 |
27.5 |
120 |
SK10 |
30,000 |
GH10 |
| HSK63A GSK16-80P | 2.75-16.0 |
40 |
80 |
SK16 |
25,000 |
GH16 |
| HSK63A GSK16C-120P | 2.75-16.0 |
40 |
120 |
SK16 |
25,000 |
GH16 |
| HSK63A GSK6-100P | 0.75-6.0 |
19.5 |
100 |
SK6 |
30,000 |
GH6 |
| IT40 X-GSK10-120P | 1.75-10.0 |
27.5 |
120 |
SK10 |
30,000 |
GH10 |
| IT40 X-GSK10-90P | 1.75-10.0 |
27.5 |
90 |
SK10 |
30,000 |
GH10 |
| IT40 X-GSK16-90P | 2.75-16.0 |
40 |
90 |
SK16 |
25,000 |
GH16 |
| IT40 X-GSK6-120P | 0.7-6.0 |
19.5 |
120 |
SK6 |
30,000 |
GH6 |
| IT40 X-GSK6-90P | 0.7-6.0 |
19.5 |
90 |
SK6 |
30,000 |
GH6 |