Anniversary Multi-Lock Milling Chuck - Advanced
It has been over 40 years since Nikken developed the multi-lock milling chuck. Our development team have developed the latest generation universal chuck which we refer to as a Nikken 'Anniversary Type' Multi-Lock Milling Chuck. One key feature of the Multi-Lock is the -90°C 'Sub-Zero' ultra-low temperature treatment that the holder is subjected to after carburizing. This treatment removes residual austenite to prevent deformation during many years use. Features: | |
All Anniversary Type Multi-Lock Milling Chucks incorporate our exclusive multi-roller system incorporating 140% more needle rollers and therefore bearing surface area than imitations. The retainer is NOT made of phosphor bronze but rather a special steel which will never break. |  |
 | Clamping at the nose is a key condition for precise milling. Surface finish and tool life are decided on clamping at the nose, rigidity and run-our accuracy. Only Nikken's mechanism performs true clamping at the nose. This makes the Anniversary Type Multi-Lock Milling Chuck ideal for heavy milling to fine finishing. |
With the Nikken Anniversary Multi-Lock Milling Chuck it is possible to obtain a run-out accuracy of 5µm (T.I.R) at a position of 100mm from the nose (3 x dia. on C32 size). The Multi-Lock holds the cutting tool shank by deforming the cylindrical part of the body with pressure from the needle roller bearings - this deformation is parallel and consistent for the entire length of the chuck bore. |  |
The Multi-Lock Advanced version features a precision ground nose ring with no notches to allow high-speed rotation. Balanced to enhance high speed operation clamping is achieved by using the Nikken GH Handle. The handle incorporates a special Cam and Bearing arrangement to grip the external diameter when tightening or untightening.
| |
| Reservdels Nummer | Kapacitet |
Nos Diameter |
Värktygslängd |
Hylsa |
Max RPM |
Nycklar |
| HSK100A C20-115G | 2.0-20.0 |
52 |
115 |
CCK20,KM20 |
20,000 |
GH20 |
| HSK100A C20-135G | 2.0-20.0 |
52 |
135 |
CCK20,KM20 |
20,000 |
GH20 |
| HSK100A C32-115G | 3.0-32.0 |
69 |
115 |
CCK32,KM32 |
12,000 |
GH32 |
| HSK100A C32-135G | 3.0-32.0 |
69 |
135 |
CCK32,KM32 |
12,000 |
GH32 |
| HSK50A C20-95G | 2.0-20.0 |
52 |
95 |
CCK20,KM20 |
30,000 |
GH20 |
| HSK63A-C32-130G | 3.0-32.0 |
69 |
130 |
CCK32,KM32 |
20,000 |
GH32 |
| HSK63A C20-110G | 2.0-20.0 |
52 |
110 |
CCK20,KM20 |
25,000 |
GH20 |
| HSK63A C20-95G | 2.0-20.0 |
52 |
95 |
CCK20,KM20 |
25,000 |
GH20 |
| HSK63A C32-110G | 3.0-32.0 |
69 |
110 |
CCK32,KM32 |
20,000 |
GH32 |
| IT40 X-C20-90G | 2.0-20.0 |
48 |
90 |
CCK20,KM20 |
25,000 |
GH20 |
| IT40 X-C32-95G | 3.0-32.0 |
68 |
95 |
CCK32,KM32 |
20,000 |
GH32 |
| IT50 X-C20-105G | 2.0-20.0 |
48 |
105 |
CCK20,KM20 |
20,000 |
GH20 |
| IT50 X-C32-85G | 3.0-32.0 |
68 |
85 |
CCK32,KM32 |
15,000 |
GH32 |
| MBT40 C20-70G | 2.0-20.0 |
48 |
71 |
CCK20,KM20 |
20,000 |
GH20 |
| MBT40 C32-85G | 2.0-20.0 |
48 |
90 |
CCK20,KM20 |
20,000 |
GH20 |
| MBT50-C20-105G | 2.0-20.0 |
48 |
105 |
CCK32,KM32 |
15,000 |
GH20 |
| MBT50 C32-105G | 3.0-32.0 |
68 |
105 |
CCK32,KM32 |
12,000 |
GH32 |
| NBT40 C20-70G | 2.0-20.0 |
48 |
71 |
CCK20,KM20 |
25,000 |
GH20 |
| NBT40 C20-90G | 2.0-20.0 |
48 |
90 |
CCK20,KM20 |
25,000 |
GH20 |
| NBT40 C20CF-90G | 2.0-20.0 |
48 |
90 |
CCK20,KM20 |
25,000 |
GH20 |
| NBT40 C32-105G | 3.0-32.0 |
68 |
105 |
CCK32,KM32 |
20,000 |
GH32 |
| NBT40 C32-85G | 3.0-32.0 |
68 |
85 |
CCK32,KM32 |
20,000 |
GH32 |
| NBT40 C32CF-105G | 3.0-32.0 |
68 |
105 |
CCK32,KM32 |
20,000 |
GH32 |
| NBT50 C20-105G | 2.0-20.0 |
48 |
105 |
CCK20,KM20 |
20,000 |
GH20 |
| NBT50 C20-135G | 2.0-20.0 |
48 |
135 |
CCK20,KM20 |
20,000 |
GH20 |
| NBT50 C20CF-135G | 2.0-20.0 |
48 |
135 |
CCK20,KM20 |
20,000 |
GH20 |
| NBT50 C32-105G | 3.0-32.0 |
68 |
105 |
CCK32,KM32 |
15,000 |
GH32 |
| NBT50 C32-90G | 3.0-32.0 |
68 |
90 |
CCK32,KM32 |
15,000 |
GH32 |
| NBT50 C32CF-105G | 3.0-32.0 |
68 |
105 |
CCK32,KM32 |
15,000 |
GH32 |
