Angular Head Tooling Nikken angular head tooling helps increase productivity. Machining features on parts where there is limited or reduced access or clearance can often lead to stop-start machining owing to multiple job setups and clamping/re-clamping operations. Nikken angular head tooling solutions reduce the time and resources spent on fixturing and workholding by enabling more high-precision operations to be performed in a single setup. Nikken's angular head tooling is available in fixed angle and/or adjustable angle configurations. |  |
1. Spindle speeders and Angular heads from Nikken incorporate TiN Bearing Nut technology. TiN Bearing Nuts are more efficient and deliver better all-round performance than holders using conventional ball bearing nuts.
- good sliding effect and reduced friction due to the TiN Bearing Nuts' surface hardness (HV2,200);
- reduced internal corrosion for long life and improved cutting performance
- better balance improves surface finish and run-out accuracy
- improved flange contact results in less vibration and therefore improved accuracy
- good sliding effect and reduced friction due to the TiN Bearing Nuts' surface hardness (HV2,200); - reduced internal corrosion for long life and improved cutting performance
- better balance improves surface finish and run-out accuracy
- improved flange contact results in less vibration and therefore improved accuracy
2. Spindle speeders and Angular heads from Nikken have a more rigid structure and a high-gripping torque than competitor products and are not subject to the effects of unwanted taper pushing. A particular feature is the 8 degree taper. The smaller the taper angle, the better concentricity is obtained.
3. Spindle speeders and Angular heads from Nikken provide customers with a run-out accuracy within 3 microns (with P type collet).
3. Spindle speeders and Angular heads from Nikken provide customers with a run-out accuracy within 3 microns (with P type collet).
Nikken angular head tooling is custom built to match an individual machine tool's specification and specific to each application. This means that angular head tools are not available as off-the-shelf solutions.
Customers looking for optimum angular head tooling solutions can take advantage of Nikken's technical and applications expertise in this area and be assured of a reliable and rapid response by contacting their local Nikken representative.
| Part No. | N Max Input | Max RPM | Angle | Power KW | Torque NM | Ratio | Collet | Capacity Dia. | Nose Length | Gauge | Spanner |
| BT40 CTAR10 | 3,500 | 7,000 | 0 to 95 | 1 | 4.3 | 1 to 2 | SK10 | 1.75 - 10.0 | 27.5 | 204.5 | SKL-10 |
| BT50 CTAR10 | 3,500 | 7,000 | 0 to 95 | 1 | 4.3 | 1 TO 2 | SK10 | 1.75 - 10.0 | 27.5 | 211.4 | SKL-10 |
| | |||||||||||
| BT40 CEP10 | 5,000 | 5,000 | 90 | 1.5 | 12 | 1 to 1 | SK10 | 1.75-10.0 | 27.5 | 189.5 | SKL-10 |